IFM Electronic ecomat 300 AC123 Series, Руководство по установке, Страница: 7 / 9

7
UK
Electrical connection 5
WARNING
Dangerous contact voltages� Electric shock possible in the case of contact�
Disconnect the system from power before working with it� ►
Protect the system against unintentional switch-on� ►
Select the correct connecting cables for the load and the environmental ►
conditions�
Use wire end ferrules for flexible connection wires� ►
WARNING
Caution during operation when switched on� Due to protection rating IP 20
contact with dangerous contact voltages is possible�
The device must only be operated by a qualified electrician� ►
Connect the device according to the wiring arrangement� ►
Do not use unmarked terminals� ►
Wiring → device label or data sheet.
Tightening torque for all terminals 0�5���0�6 Nm
Core cross sections 5.1
Order numbers AC123x / AC124x
Connection AC, massive 0�2���6 mm
2
(24���10 AWG)
Connection AC, flexible 0�2 (0�25 m end sleeve)���4 mm
2
Connection DC, massive 0�2���6 mm
2
(24���10 AWG)
Connection DC, flexible 0�2 (0�25 m end sleeve)���4 mm
2
External fuse 5.2
Protect the AC input voltage by means of circuit-breakers (fuse rate → data ►
sheet)�
Observe the national regulations�
►