IFM Electronic ecomat 200 Series, Руководство пользователя, Страница: 15 / 25

P
RESET
C
OUNTER
E89005
P
AGE 7
Preset 1 on-off
on = on
oFF = off
Permanent signal of output 1,
activated at count value
>
preset 1*
Permanent signal of output 1,
will become passive at count
value
>
preset 1**
Timed signal of output 1, will
become passive at count value =
preset 1**
Timed signal of output 1, activa-
ted at count value = preset 1*
Duration of timed signal of output
1, can be set from 00.01 s to
99.99 s.
* Activation of relay coil when
reaching the preset value
** Relay coil becomes dead when
reaching the preset value
Permanent signal of output 2,
activated at count value
>
preset 2*
Permanent signal of output 2,
will become passive at count
value
>
preset 2**
Timed signal of output 2, will
become passive at count value =
preset 2**
Timed signal of output 2, activa-
ted at count value = preset 2*
Duration of timed signal of output
2, can be set from 00.01 s to
99.99 s.
* Activation of relay coil when
reaching the preset value
** Relay coil becomes dead when
reaching the preset value
Setting Preset 1
Setting of the 5th decade
Setting Preset 2
Setting of the 6th decade
Setting the sign for preset 1
7. Programming of the Preset Value:
After pressing one of the arrow keys, the leading zero
blanking will be suppressed for approx. 4 seconds and
the least significant digit of the preset value flashes with
a frequency of 1 Hz.
The value of the flashing digit can be increased by
using the
↑
-key. With the
←
key it will be changed to the
next digit. If no key is pressed for 4 seconds, the lea-
ding zero blanking will be activated automatically again.
In operating mode Impulse Counter and Frequency
Meter the new value will be taken over now.
7.1 Setting of the sign
Select the sign by using the
←
key. The sign will start to
flash now and can be assigned to the preset value
resp. eliminated by using the
↑
-key. If no key is pressed
for 4 seconds, the leading zero blanking will be activa-
ted automatically again. Preset value and count value
are displayed now with the corresponding sign.
Caution! In case of automatic resets no negative
values are to be set for preset 2.