IFM Electronic AL1900 Скачать руководство пользователя | Manualshive

Страница: 26 / 90

background image

26

ifm

Device Manual IO-Link Master with PROFINET interface CabinetLine 8 Ports IP 20 (AL1900)

05 / 2018

Configuration

LR DEVICE

>

8.1.2

IoT: Configure access rights

16555

The access rights define which instance may read and / or write the parameter data, process data and
event/diagnostic messages.

In order to configure the access rights to the IO-Link master:
►

Select [IoT] menu.

>

The menu page shows the current settings.

►

Set the following parameters as required:

Name

Description

Possible values

[Access Rights]

The access rights to the
parameter data, process data
and the event/diagnostic
messages of the IO-Link master
as well as the connected IO-Link
devices

[PR IoT]



PROFINET and IoT Core have read
and write access rights to parameters
and process data



PROFINET and <IoT Core> have read
access rights to events/alarms

[PR IoT
(read-only)]



PROFINET has read and write access
rights to parameters and process data



PROFINET has read access rights to
events/alarms



IoT Core only has read access rights to
parameters, process data and
events/alarms

[IoT only]



IoT Core has read and write access
rights to parameters and process data



IoT has read access rights to
events/alarms



PROFINET has no access rights

►

Save changed values on the device.

Parameter [Access Rights]:

Different parameter settings in the PROFINET projection software and the IoT applications
can result in undesired system behaviour. The set values of the PROFINET projection
software apply.

Changes of the parameter [Access Rights] are only effective after restarting the device.

To activate the changed access rights:
►

Firmware: Reboot the device

(

→ p.

«
...
24
25
26
27
28
...
»

Содержание AL1900



























































































Отзывы:

Нет отзывов

Похожие инструкции для AL1900

Бренд: Cambro Страницы: 6

Бренд: VBM Страницы: 36

Бренд: W&H Med Страницы: 122

Бренд: jablotron Страницы: 2

Бренд: Konica Minolta Страницы: 32

Бренд: Nemalux Страницы: 6

Бренд: OBDLink Страницы: 2

Бренд: Rapala Страницы: 14

Бренд: S.R.Smith Страницы: 43

PowerGen 5650 Series

Бренд: Qnergy Страницы: 10

STOMAMED COL-160

Бренд: Orliman Страницы: 12

Бренд: Jumil Страницы: 78

Бренд: Moog Страницы: 15

Бренд: Nexersys Страницы: 26

evolution G-50 H

Бренд: GAMA Страницы: 48

Бренд: Festo Страницы: 100

Бренд: ML Accessories Страницы: 4

Бренд: Zoom Страницы: 16

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды