8
8.2 Menu navigation
• Quick
setup
- (Summary of the menu points required for a basic configuration)
▼
Reading of the current AS-i configuration (config all)
▼
Setting of the field bus connection
• Slave
lists
- (Checking of the addresses of the connected AS-i slaves)
▼
List of the detected AS-i slaves (LDS)
▼
List of the projected AS-i slaves (LPS)
▼
List of the activated AS-i slaves (LAS)
▼
List of the AS-i slaves with peripheral fault (LPF)
• Address
slave
- (Programming of the correct addresses in the connected AS-i slaves)
▼
Readdressing of an AS-i slave connected to the gateway
▼
Automatic addressing of new AS-i slaves to the next free address (easy
start-up)
• Diagnostics
▼
(Diagnosis of the AS-i network and the slave communication)
• Master
setup
- (AS-i master flags)
▼
Reading of the current AS-i configuration (config all)
▼
Changeover to the projection mode: configuration of the AS-i system
▼
Changeover to the protected mode: standard mode (the master monitors
the configuration)
▼
Deactivation of the automatic AS-i slave addressing in the protected mode
▼
Deactivation of the AS-i reset when exiting the projection mode
▼
Display of the config error counter of the connected AS-i system
▼
Reset of the config error counter
▼
Display of the fault rate percentage of the connected AS-i system
