12
Remote Control Binding Process:
VI. Binding（ELRS）
VII. Firmware Flashing Mode
Press and hold the power button for 2 seconds
Entering RF module firmware
flashing mode
1
2
Press the ↑ key of the 5-Axis menu button
Press and hold the power button
*For more specific flashing process please refer to iFlight tutorial on the official website.
1
2
Press the
↓ key of the 5-Axis menu button
Press and hold the power button
1.
Press the
↑
key of the left 5-Axis menu button, and
press and hold the power button until the battery
status LED flashes twice, then enter the wired
flashing RF module mode. Press and hold the power
button to exit the flashing mode.
Enter the remote control mainboard
firmware flashing mode
1. Press the
↓
key of the left 5-Axis menu button,
and press and hold the power button until the
battery status LED scrolling flash, then enter the
wired flashing remote control mainboard mode,
press and hold the power button to exit the
flashing mode.
1
2
1
2
1.
Power up the receiver three times, the blue light blinks twice indicating the
binding mode.
2. When the remote control is powered on, press and hold the power button for 2
seconds, then the remote control buzzer will start to beep three times, indicating it
enters the binding mode.
3. After binding successfully, both the receiver and the remote control status LED
will turn solid blue.
Содержание COMMANDO 8 Lite
