iFIT NordicTrack COMMERCIAL X32i Скачать руководство пользователя страница 27

27

Before moving the incline trainer, insert the key 

into the console (A), raise the incline to the maxi-

mum incline level, remove the key, and unplug the 

power cord. 

Due to the size and weight of the incline trainer, 

moving it requires two or three persons. Hold the 

uprights (B) firmly near the console (A). Tip the incline 

trainer back until it rolls freely on the wheels (C). 

CAUTION: To decrease the possibility of injury 

or of damage to the incline trainer, do not lift the 

incline trainer by the plastic belly pan (D). Do not 

pull on the console.  

Carefully roll the incline trainer on the wheels to the 

desired location, and then lower it to the level position. 

CAUTION: To reduce the risk of injury, use extreme 

caution while moving the incline trainer. Do not 

attempt to move the incline trainer over uneven 

surfaces. 

Make sure that the incline trainer rests firmly on the 

floor. If the incline trainer rocks even slightly, turn the 

Leveling Feet (77) as needed until the rocking motion 

is eliminated.

C

B

D

A

77

 

HOW TO MOVE THE INCLINE TRAINER

Содержание NordicTrack COMMERCIAL X32i









































Отзывы: