ifi ZEN CAN, Руководство пользователя

Страница: 13 / 21

FAQs
How do I use the ZEN CAN's inputs?
Please connect a cable of choice from your DAC to the ZEN CAN's suitable input, and engage via the input selector button on the
product's front. Single-ended cables will work with 3.5mm and RCA inputs, whereas a balanced cable will work with 4.4mm Pentaconn
input.
Can all three inputs connected at the same time?
You can have cables connected into each ZEN CAN's input, but only one can be active .
How do I know which of the ZEN CAN's inputs is currently engaged?
All available inputs are labeled respectively and can be seen just below the input selection button on the ZEN CAN's front. A currently
engaged input will be highlighted by a white LED.
Can I cycle between inputs while the product is powered?
Yes, you can.
What does the gain button do?
It matches the headphone amplifier gain to the headphone. Headphones have very widely varying sensitivity, so a good match in gain
is important, too low gain and headphones will not play loud enough, too much gain and there will be excessive noise and distortion
with very little usable volume range.
13