ifi T188-250, Инструкция по эксплуатации и техническому обслуживанию

Страница: 24 / 35

Page 24
POWER AND METERING - STATUS RESPONSES FOR AMP
CODE TWTA FUNCTION
POWERFWD
Returns Forward Power Value in Watts, ‘POWER FWD: XXXXX W’
POWERRFL Returns Reflected Power Value in Watts, ‘POWER RFL: XXXXX W’
HELIXV Returns Helix Volts Value in Volts, ‘HELIXV: XXXXX V’
HELIXI Returns Helix Current Value in milliamps, ‘HELIXI: XXXXX mA’
COLLV Returns Collector Volts Value in Volts, ‘COLLV: XXXXX V’
COLLI Returns Collector Current Value in milliamps, ‘COLLI: XXXXX mA’
FILAMENTV Returns Filament Volts Value in Volts, ‘FILAMENT V: XXXXX V’
[Optional]
GRIDV Returns Grid Volts Value in Volts, ‘GRID V: XXXXX V’ [Optional]
FILAMENTH Returns Filament Hours Value, ‘FIL HRS: XXXXX’
BEAMH Returns Beam Hours Value, ‘BEAM HRS: XXXXX’
PULSEW Returns Pulse Width Value, ‘PULS W: XXXXX.X uS’ [ In Pulse unit only ]
FRQNCY Returns Pulse Frequency Value, ‘REP RATE: XXXXXX Hz’ [ In Pulse
unit only ]
DUTYCYC Returns Duty Cycle Value, ‘DTY CYC: XXXXX %’ [ In Pulse unit only ]
ZEROATT Sets the Amplifier for ZERO Attenuation & Returns, ‘GAIN: 00100 %’
[Optional]
FULLATT Sets the Amplifier for FULL Attenuation & Returns, ‘GAIN: 00000 %’
[Optional]
MODEL
Returns Model number of the unit
SN Returns Serial number of the unit
*IDN? Returns ASCII response comprising of four data fields in the format
<Manufacturer>, <Model>, <Serial Number>, <Firmware Version>
*RST Reset Command, Sets the Amplifier to the factory default power up state
(reboots MPU)