ifi Stereo 50, Руководство пользователя

Страница: 13 / 18

Tone Controls
The iFi RETRO Stereo 50 incorporates a +/- 8dB precision studio-grade tone control. The tone control system
can be bypassed by the Direct switch:
Tip:
This tone control system has been engineered with utter transparency; one should not hear a significant
difference with the Direct switch On or Off if the tone control themselves are at their neutral position.
This tone control system can be used to recreate a number of additional EQ curves for vinyl record playback,
please refer to the: Turntable section for more details.
On = Direct On, tone control system bypassed.
Off = Direct Off, tone control system is enabled.
•
•
Off
On
Direct
Bass Treble
TONE
Input
Bass
Tip:
Sonically-damaging DSP is NOT used for either XBass nor 3D HolographicSound® systems. It uses the
highest-quality discrete components and so the integrity of the original recording is retained. Hence all the
clarity and resolution of the original music is retained.
•
3D HolographicSound System®
Bass System® X
Maximum Bass correction (Recommended when the LS3.5 is used with speaker stands).
Moderate Bass correction (Recommended for LS3.5 under normal setup).
OFF
-
●●●
●
For narrow (<1.5m apart) speaker placement.
For Normal Use (Recommended).
OFF
-
●●●
●
•
•
For use with the iFi Retro LS3.5, it is recommended to set the XBass to the following configurations:
1. If the iFi Retro LS3.5 loudspeakers are placed on speaker stands in free space, use the setting.
2. If the iFi Retro LS3.5 loudspeakers are placed on a console or in an open shelf, use the setting.
The iFi Retro LS3.5 speakers are designed with the XBass function of the Retro Stereo 50 as part of the
overall frequency response, hence it is recommended to at least use the setting for the maximum sound
quality.
“ ”
“ ”
“ ”
●●●
●
●