4. RF Silencers – Fixed
All USB cables due to their inherent nature
inevitably pickup AND radiate radio
frequencies that negative impact the
sonic performance.
On the Gemini Dual-Headed USB cable, to
address this, there are 3 sets of RF
Silencers. The two Silencers at each end
are most effective located as close to their
respective USB connector as possible .
Note: The custom-designed metal oxide
ceramic RF Silencers offer different
permeabilities. Compared to generic filters
this atypical approach is incredibly effective;
over the widest frequency range.
5. Centre RF Silencer
Feel free to adjust this 3 RF Silencer by
sliding it along the cable as different
setups may require different adjustments
to attain the optimal sonic performance .
Tip: To start with, set this 3 RF Silencer to
the 'Golden Ratio', with the shorter section
closer to the USB 'B' connector (item 3
above).
1. USB “A” Audio( ) connector
This transmits the USB audio data.
Connect it to a USB port on the computer.
2. USB “A” Power( )
connector
This transmits the USB power. Connect it
to a USB port on the computer.
Tip: For maximum performance, use with the
iFi iUSB Power; connect the Audio connector
( ) to the USB output port labelled ” “
; connect the Power connector( ) to the
USB output port labelled “ “.
3. USB“B” connector
Connect this to the input of the USB
DAC/Sound card/Interface card etc.
Tip: The Gemini USB cable uses the all new
machined iFi FINAL USB connector. Made of
aluminium alloy, the additional shielding
and rigidity has taken USB cable design to a
whole new level.
Compatible with High-Speed USB 2.0
(24Bit/192khz and higher supported)
Lengths/Weights: 0.7m / 220g (0.49 lbs)
1.5m / 240g (0.53 lbs)
Warranty period: 12 months
Specifications
•
•
•
ifi-audio.com
Ver1.2
warranty
In order to activate the warranty for this iFi
product, you must register with the iFi
website.
Component :
Serial no:
ifi-audio.com
2
1
3
5
4
4
3
rd
rd
Gemini
5
Terms and Conditions
iFi guarantees that this iFi product shall be free from defects in materials and
workmanship for a period of 1 year for parts and labour.
The warranty period begins at the date of retail sale by an authorized iFi
distributor/dealer and is subject to the following requirements and
understandings:
• It is the responsibility of the buyer within 30 days from the original sale, to
register and activate the product warranty with the iFi website.
• The original invoice must be produced for authentication prior to any
warranty claim.
• The iFi product must not have been modified in any manner whatsoever,
or the warranty will immediately become void.
• The iFi warranty is only valid in the country of original sale and is not
transferable.
• The product must not have been stored in a humid environment; nor
subjected to weather, water, or saltwater spray.
• iFi shall not, under any circumstances, be liable for any incidental or
consequential damages arising from the loss of property or other damage
or losses due to the failure of an iFi product. iFi is not liable for loss of use or
inconvenience caused by the failure of an iFi product. iFi is not liable for
damage caused to other audio components because of the failure of an iFi
product.
• During the warranty period, iFi will repair the product to working order, or,
at iFi's discretion, replace the defective module with a similar available
product.
• All repairs performed after expiry of the warranty period will be charged to
the owner and will carry a 180-day warranty on parts and labour. The
customer is responsible for shipping the unit to the iFi distributor in the
original packaging. This includes the payment of any shipping charges and
related taxes.
• Should any warranty issues arise, iFi’s decision is full and final.
