r
Use of extension cord not recommended since it may not be
properly earthed.
r
Use ISI marked sockets of reputed make for preventing loose
contact of power supply cable.
r
Ensure that there is a firm connection between the 3 PIN PLUG and
SOCKET, else it may result in sparking and subsequent failure of 3
pin plug.
r
Ensure that L,N,E is as per the Fig. Shown
r
Washing machine should always be connected to socket with 16
Amps MCB or other automatic short circuit protection devices.
CAUTION :-
The producer/Manufacturer declines any responsibility
for damage caused by failure to observe this rule. You are therefore
advised to check that your household supply has an efficient earth.
11
WHY DOES IT HAPPEN?
INDICATOR LAMP DOES NOT GLOW.
q
q
Check for loose connections in plug/socket.
WATER DOES NOT ENTER MACHINE/DETERGENT NOT
BEING FLUSHED INTO DRUM.
q
Check water supply
q
Porthole door not firmly closed
q
Water tap not turned on
q
Bent inlet hose
q
Sieve on inlet valve clogged
SUDS ESCAPING FROM DETERGENT DISPENSER TRAY./
EXCESSIVE FOAM IN THE DRUM.
q
Detergent used is not a front loading washing machine
detergent
q
Excessive detergent used
WATER LEAKAGE FROM THE MACHINE
.
q
Inlet/Outlet hose connection loose
q
Coin trap cover or drain plug not screwed on properly
q
Inlet hose leaking
MACHINE DOES NOT DRAIN
.
q
Outlet hose end above 1 mtr. from floor level
MACHINE VIBRATES STRONGLY DURING SPINNING.
q
Machine not levelled properly
q
Clothes not loaded as instructed
Check if the machine is ON.
FAULT DIAGNOSIS
34