iFan IF7409, Руководство пользователя, Страница: 4 / 12

13.
14.
15.
16.
17.
18.
19.
20.
Avoid placing the power cable on abrasive or sharp surfaces or in positions where it can be
damaged easily. The cable must NOT be placed under carpets, or covered with throw rugs,
runners or similar. Arrange the cable away from the high traffic area, and where it will NOT be
tripped over.
DO NOT operate the fan next to an open window while it is raining. Rainwater splashing onto
the fan may cause an electric shock
DO NOT use or store the appliance outdoors. Store and use the appliance only indoors, or in
any case, protected from weathering such as rain, direct radiation of the sun and dust.
Operation
If you are using the appliance for the first time, you should:
a.
b.
c.
d.
e.
f.
g.
h.
DO NOT:
•
•
•
•
•
•
•
•
•
•
During operation, DO NOT touch the appliance with wet body parts, and it is recommended
to have between you and the standing surface, an isolating element (for example, wearing
shoes with rubber soles).
DO NOT soak the Motor Unit in water or other liquids, wash it under the tap, or let any liquid
flow into the internal casing of the appliance to prevent electric shock. In case of accidental
fall in water, DO NOT try to take it out, but first switch the appliance off.
Plug and unplug the power cable firmly holding it with dry hands. Always unplug the power
cable to avoid overheating and avoid stretching it (DO NOT pull it, tug it or use it to drag the
appliance to which is connected). Before unplugging the appliance, turn the ON/OFF & Speed
Control Knob to the OFF position and switch the socket switch off.
Switch the appliance off and unplug the power cable of the appliance if it is NOT used for a
long period, before storing, assembling & disassembling, cleaning or performing any
maintenance operation. Before storing, cleaning or performing any maintenance operation,
leave to cool for at least 30 minutes.
Clean the exterior parts of the fan thoroughly with warm water & detergent with a
non-abrasive sponge and wipe dry. DO NOT use metal scouring pads. Make sure that the
Motor Unit DOES NOT come into contact with water.
Check that the Fan Grilles and Fan Blade are NOT damaged.
Place and use the appliance on a horizontal, stable and dry surface. Damage may occur if
the appliance is placed on an incline or decline. DO NOT attempt to mount the appliance
on a wall or ceiling.
Check that the appliance is fully assembled before plugging it into the wall socket.
To turn ON : Turn the ON/OFF & Speed Control Knob for the fan speed
(‘1’ Low – ‘2’ Medium – ‘3’ High) you desire, with or without oscillation.
Tilt the Front Grille upwards or downwards to the desired position (0°, 30°, 60°, 90°) to
adjust the angle of the fan.
To turn OFF : Turn the ON/OFF & Speed Control Knob to the OFF position.
Make sure to remove any label or protective sheet which may prevent its proper functioning.
cover the appliance during functioning;
insert objects or body parts (including clothing and hair) inside the protection cover of the
appliance to avoid personal injury or damage to the Motor when the appliance is in
operation;
attempt to force the fan blades to turn or stop the blades from turning, which may lead to
the motor overheating. If the motor is operating, but the Fan Blades do not move, switch
the appliance off;
touch the inside of the fan while it is operating. The blades are rotating at very high speeds,
which may lead to injury to your fingers and hands;
turn the ON/OFF & Speed Control Knob too forcefully;
use the appliance near curtains or textiles;
use the appliance to dry wet clothes or use the appliance in a damp environment;
use any of the following agents as a cleaner: gasoline, thinners, or benzene;
operate the appliance for more than 6 hours without turning it off for at least 30 minutes
to let the appliance cool down for a total usage of 12 hours a day – failure to heed this
warning may result in motor failure;
leave the appliance unsupervised during operation.
3