Operation
16. If you are using the appliance for the first time, you should:
a. Clean the exterior parts of the fan thoroughly with warm water & detergent with
a non-abrasive sponge and wipe dry. DO NOT use metal scouring pads. Make
sure that the Motor Unit DOES NOT come into contact with water.
b. Check that the Fan Grilles and Fan Blade are NOT damaged.
c. Place and use the appliance on a horizontal, stable and dry surface. Damage
may occur if the appliance is placed on an incline or decline.
d. Assemble the appliance fully before plugging it into the wall socket.
e. To turn ON : Press the Speed Button to the fan speed (Low – ‘1 / 2 / 3’ – High)
you desire.
f. Tilt the Fan Head or Grille upwards or downwards to the desired position to
adjust the angle of the fan.
g. Pushing down the Swing Button on the Fan Head will make the fan oscillate
side to side, sweeping an arc across the room. To stop the fan from oscillating,
pull up the Swing Button on the Fan Head.
h. To turn OFF : Press the Speed Button to the fan speed ‘0’.
i. Make sure to remove any label or protective sheet which may prevent its
proper functioning.
DO NOT:
•
cover the appliance during functioning;
•
insert objects or body parts (including clothing and hair) inside the protection
cover of the appliance to avoid personal injury or damage to the machine when
the appliance is in operation;
•
attempt to force the fan blades to turn or stop the blades from turning, which
may lead to the motor overheating. If the motor is operating, but the Fan Blades
do not move, switch the appliance off;
•
touch the inside of the fan while it is operating. The blades are rotating at very
high speeds, which may lead to injury to your fingers and hands;
•
press the Speed Buttons too forcefully;
•
use the appliance near curtains or textiles;
•
use the appliance to dry wet clothes or use the appliance in a damp
environment;
•
use any of the following agents as a cleaner: gasoline, thinners, or benzene;
•
operate the appliance for more than 6
hours without turning it off for at least 30
minutes to let the appliance cool down for a total usage of 12
hours a day –
failure to heed this warning may result in motor failure;
•
leave the appliance unsupervised during operation.
