iEXERGY wibutler pro, Руководство пользователя

Страница: 16 / 25

16
11. Access point mode
If the wibutler is used to establish its own wireless network instead of being connected
to an existing one, it may be operated as an access point. To do this, press and hold the
service button for 10 seconds.
As soon as the status LED emits a pink light and “access point” sounds, promptly relea-
se the button. The wibutler pro is now set to access point mode (the status LED will
resume a steady white colour and “access point on” will sound). The device can now be
located among available networks. Smartphones and tablets can now be connected
to the wibutler network. To precisely identify the wibutler network, consult the last six
characters of the LAN-MAC address listed on the underside of the device (network
name: “wibutler-XXXXXX”). The wireless password is the same as the master key, also
listed on the bottom of the device.
Note:
In access point mode, online services and systems updates will not be available.
To terminate access point mode again, press and hold the service button for ten se-
conds and release upon hearing “access point”.