background image

  -  +

NST003 Glass Break Alarm Manual

  -  

+

1

OFF

OFF

1

2

3

4

INSTALLATION :

1. To arm the unit, open the battery compartment at the front of unit, install 2pcs AAA

batteries and close it. Sliding the power switch to the "-/+" position, and the device will
emit a powerful 120-decibel alarm when the window or glass door is tampering or
breakage and the alarm siren will sound continuously 60second.

2. LED blink every 4 seconds when switched "-/+".

1. Easy to install - no wiring, stick the alarm on any window or glass surface, warning words

visible outside.

2. Turn the unit upside down and open the battery compartment install AAA*2pcs batteries

noting polar (not included) and close the compartment.

3. Place switch to the "-/+" (low/high sensitivity selection) position to set up a defensive.
4. Low-battery indicator light, If you see the indicate red LED always on, then need replace

new battery.

OPERATION :

Alarm: >120dB SPL/30cm
Power Supply: 2 * AAA batteries
Dim.: 78*78*16.49mm

SPECIFICATIONS :

1. Status LED
2. Siren
3. Battery compatment
4. Switch

Отзывы: