IES Keywatt 50 Series, Руководство пользователя

Страница: 6 / 24

www.ies-synergy.com
User Manual
DUM019665-EN
6
3. General Safety instructions
NOTICE
SAVE THESE INSTRUCTIONS
• To ensure proper and safe operation, please read these user instructions carefully and
keep them for future reference.
• This manual contains important instructions for the charging station that shall be followed
during installation, operation and maintenance of the unit.
• The locking key, supplied with unit, should be kept in a secure and known location by an
individual that has read and understands the content of this manual.
I
WARNING
RISK OF ELECTRIC SHOCK, INJURY, AND/OR BURNING
• Only qualified, trained and authorized people will repair, replace or adjust this equipment.
• Make sure the AC input breaker is OFF and measures 0V after the breaker.
• Disconnect the protective device located upstream of the charger before working on it.
• Do not use this product if the enclosure or the EV connectors are broken, cracked, opened
or show any other indication of damage.
• Replace the damaged cables by same caracteristics cables.
• Do not use a cord extension set, second cable assembly or adaptors in addition to the
cable assembly for the connection of the EV to the EVSE.
• Do not alter AC plug provided – where it does not fit outlet, have proper outlet installed
by a qualified electrician. Improper connection increases the risk of an electric shock.
• Charger shall be grounded to reduce risk of electric shock. Charger is equipped with an
electric cord having an equipment-grounding conductor and a grounding plug. The plug is to
be plugged into an outlet that is properly installed and grounded in accordance with all local
codes and ordinances.
• This unit is for use on a circuit having a nominal rating more than 120V and is factory-
equipped with a specific electric cord and plug that connects to an electric circuit. Make
sure that the charger is connected to an outlet having the same configuration as the plug.
Adapters shall not be used with this charger.
• This equipment employs parts, such as switches and relays, that tend to produce arcs or
sparks.
• Never open the charger while input power is present.
• The equipment must be installed and operated with minimum distance of 22cm of the
human body.
Failure to follow these instructions can result in death or serious injury