IEMCA MASTER 880-VERSO P, Руководство по эксплуатации и техническому обслуживанию

Страница: 142 / 232

EN
6 - USE AND OPERATION MASTER 880/880r VERSO
6 - Pag. 22 / 23
6.10 LUBRICATING OIL - FLOW ADJUSTMENT
The oil flow in the guide channels and bush
holder device is automatically controlled
during the bar feeder automatic cycle. The
pump is started when the bar feeder has
completed the bar change and stops when
the bar pusher approaches the bush holder
device.
It is necessary to adjust the oil flow in the
bush holder device according to the bar
diameter and profile.
6.11 BAR FEEDER STOP
BAR FEEDER EMERGENCY STOP
WARNING — CAUTION:
if the emergency stop is activated whilst the lathe is working, before restarting
the working cycle, check that no dangerous conditions have been created due to
the sudden stop.
Example: if the tool was removing chips, before restarting the lathe, distance
the tool from the piece.
• To stop the bar feeder in emergency, press one of the emergency buttons of the bar feeder
or lathe.
BAR FEEDER STOP AT THE WORKING CYCLE END
WARNING — CAUTION:
when stopping the machine normally, do not use the emergency buttons.
• Complete the operations in your working schedule.
• Stop the bar feeder by pressing .
• Stop the lathe.
• Turn the main switch to the OFF position.