manualshive.com logo in svg

IEI Technology WAFER-LX Series, Руководство пользователя, Страница: 194 / 198

Поделиться
Скачать
IEI Technology WAFER-LX Series Скачать руководство пользователя страница 194

 

 

Page 194 

 

IEI® Technology, Corp

.

 

WAFER-LX

drives of the RAID configuration will also be deleted.

 

 

Step 1: 

Step 2: 

Step 1: 

Step 2: 

Step 1: 

Step 2: 

Delete a RAID setting

. Use the arrow keys to highlight 

Delete RAID Setting & 

Partition

 and press 

E

NTER

. A flashing ‘E’ appears at the 

Drive Menu

 where the 

member drives to be removed can be chosen. 

Confirm Delete

. The 

Data on RAID drives will be erased (Y/N)

 confirm box 

appears. Press 

Y

.

Step 0:

 

A.4.6 Delete All RAID Setting & Partition 

 WARNING! 

If a RAID configuration is deleted, all data previously stored on the member 

drives of the RAID configuration will also be deleted. 

Delete RAID Settings

. Use the arrow keys to highlight 

Delete All RAID Setting 

& Partition

 and press 

E

NTER

.  

Confirm delete

. The 

Data on RAID drives will be erased (Y/N)

 confirm box 

appears. Press 

Y

.

Step 0:

   

A.4.7 Rebuild RAID Array 

The 

Rebuild RAID Array

 option can rebuild a RAID array if a member of a RAID 

configuration should fail. Neither RAID 0 nor JBOD provides data redundancy. The 

Rebuild RAID Array

 option only applies to RAID1 arrays and is applicable when a 

member of a RAID1 configuration has failed. 

Select Rebuild Array

. Use the arrow keys to highlight 

Rebuild RAID Array

 and 

press 

E

NTER

. A flashing ‘R’ appears in the list of existing arrays.

 

The source and 

destination drives will be displayed.   

Confirm rebuild array

. Press 

Y

 to begin the rebuild process.

 

Step 0:

 

Содержание WAFER-LX Series







































































































































































































Отзывы:

Нет отзывов