IEI Technology WAFER-LX Series Скачать руководство пользователя страница 97

Страница: 97 / 198

Page 97

WAFER-LX

option. Once set, this IDE channel becomes

inaccessible and any drives attached to it are

undetected.

Auto

(Default)

Setting this option allows the device to be automatically

detected by the BIOS.

Manual

Selecting this option allows manual configuration of the

device on the IDE channel in BIOS.

Access Mode [Auto]

The

Access Mode

option can only be configured if the BIOS configuration option is set to

either

Manual

Auto

.. Use the

Access Mode

option to determine the hard disk BIOS

translation modes. Most systems now use hard drives with large capacities and therefore

either the LBA translation mode or auto mode should be selected.

CHS

Select this mode if the HDD capacity is less than

504MB.

LBA

Select this mode if the HDD capacity is more than

8.4GB.

Large

This mode is an extended ECHS mode and while it

supports HDDs larger than 504MB, it is not

recommended.

Auto

(Default)

If you are unsure of what access mode to set, select this

option.

Capacity

The

Capacity

specification indicates the storage capacity of the HDD installed in the

system.

Cylinder

Содержание WAFER-LX Series







































































































































































































Результаты поиска

Содержание WAFER-LX Series

Отзывы:

IEI Technology WAFER-LX Series, Руководство пользователя, Страница: 97 / 198

Результаты поиска

Содержание WAFER-LX Series

Отзывы: