IEI Technology WAFER-LX Series Скачать руководство пользователя страница 190

Страница: 190 / 198

Page 190

IEI® Technology, Corp

WAFER-LX

naming an array.

Step 0:

NOTE:

1. To reduce the chance of losing data, ALi imposes certain limitations on the

RAID configuration options. PATA drives connected on the same IDE

channel cannot be selected as the members of a RAID 0 array. Avoid

mixing PATA and SATA disk drives in a RAID 0 array.

2. Always use disk drives of the same capacity to create a RAID array. The

excessive capacity of a larger disk drive cannot be utilized because data

stripes are equally distributed across all members of a RAID array.

A.4.2 Create RAID 1 Mirroring for Reliability

WARNING!

All data previously stored on the member drives of a RAID configuration

destroyed

during the RAID initialization process. If “used” drives are used to

create a RAID array, make sure the data has been moved or backed up

before creating a RAID array out of the disk drives.

Step 1:

Select

“

Create RAID 1 Striping for Reliability”

. Use the arrow keys to highlight

Содержание WAFER-LX Series







































































































































































































Результаты поиска

Содержание WAFER-LX Series

Отзывы:

IEI Technology WAFER-LX Series, Руководство пользователя, Страница: 190 / 198

Результаты поиска

Содержание WAFER-LX Series

Отзывы: