manualshive.com logo in svg

IEI Technology WAFER-LX Series, Руководство пользователя, Страница: 189 / 198

Поделиться
Скачать
IEI Technology WAFER-LX Series Скачать руководство пользователя страница 189

 

 

Page 189

 

WAFER-LX

 

 

Step 10: 

Step 11: 

Step 1: 

Step 2: 

Step 3: 

Step 4: 

Configure the RAID settings

. Use the 

RAID BIOS Setup Utility

 in Error! 

Reference source not found. to configure the RAID array. Brief descriptions are 

given below. 

Install the OS

. After the RAID array has been configured (see below) install the 

OS. To do this, please refer to the documentation that came with the OS.

 

Step 0:

 

A.4 RAID Options: 

A.4.1 Create RAID 0 Striping for Performance 

 WARNING! 

All data previously stored on the member drives of a RAID configuration 

are

destroyed

 during the RAID initialization process. If “used” drives are used to 

create a RAID array, make sure the data has been moved or backed up

before creating a RAID array out of the disk drives.       

Select

 “

Create RAID 0 Striping for Performance”

. Use the arrow keys to 

highlight 

Create RAID0 Striping for Performance

 and press 

E

NTER

. A flashing 

‘S’ appears on the 

Drive Menu

 where the member drives to be included in the 

RAID 0 array can be chosen. 

Select RAID array drive members

. Use the space bar to select members of the 

RAID array. The flashing cursor changes to a lower case ‘s’ once any of the 

connected disk drives has been selected. Follow the same method to select 

another member drive.     

Confirm

. The 

Create RAID0(Y/N)

 confirm box appears. Press 

Y

. 

Name the array

. Enter a nickname for the created array. Upper and lower case 

alphabetic, numeric, space, and underscore characters are all applicable for 

Содержание WAFER-LX Series







































































































































































































Отзывы:

Нет отзывов