IEI Technology WAFER-KBN-1, Руководство пользователя

Страница: 66 / 138

WAFER-KBN-i1 3.5" SBC
Page 52
Figure 4-1: SO-DIMM Installation
Step 1: Locate the SO-DIMM socket . Place the board on an anti-static mat.
Step 2: Align the SO-DIMM with the socket . Align the notch on the memory with the
notch on the memory socket.
Step 3: Insert the SO-DIMM . Push the memory in at a 20º angle. (See Figure 4-1 )
Step 4: Seat the SO-DIMM . Gently push downwards and the arms clip into place. (See
Figure 4-1 ). Step 0:
4.4 iRIS-1010 Module Installation
WARNING:
The iRIS module slot is designed to install the iRIS-1010 module only.
DO NOT install other modules into the iRIS module slot. Doing so may
cause damage to the WAFER-KBN-i1.
To install the iRIS-1010 module, please follow the steps below.
Step 1: Locate the iRIS module slot . See Figure 3-11 .
Step 2: Remove the retention screw . Remove the retention screw as shown in
Figure 4-2 .