IEI Technology WAFER-EHL Series Скачать руководство пользователя страница 81

Страница: 81 / 142

WAFER-EHL SBC

Page 69

5.1.3

Getting Help

When

is pressed a small help window describing the appropriate keys to use and the

possible selections for the highlighted item appears. To exit the Help Window, press the

key.

5.1.4

Unable to Reboot after Configuration Changes

If the computer cannot boot after changes to the system configuration is made, CMOS

defaults. Use the clear CMOS button described in

Chapter

5.1.5

BIOS Menu Bar

The

menu bar

on top of the BIOS screen has the following main items:

▪

Main – Changes the basic system configuration.

▪

Advanced – Changes the advanced system settings.

▪

Chipset – Changes the chipset settings.

▪

Security – Sets User and Supervisor Passwords.

▪

Boot – Changes the system boot configuration.

▪

Save & Exit – Selects exit options and loads default settings

The following sections completely describe the configuration options found in the menu

items at the top of the BIOS screen and listed above.

Содержание WAFER-EHL Series















































































































































Результаты поиска

Содержание WAFER-EHL Series

Отзывы:

IEI Technology WAFER-EHL Series, Руководство пользователя, Страница: 81 / 142

Результаты поиска

Содержание WAFER-EHL Series

Отзывы: