IEI Technology WAFER-AL, Руководство пользователя

Страница: 90 / 139

WAFER-AL SBC
Page 76
5.3.3.1.1 Serial Port 1 Configuration

Serial Port [Enabled]
Use the Serial Port option to enable or disable the serial port.

Disabled
Disable the serial port

Enabled D
EFAULT
Enable the serial port

Change Settings [IO=3F8h; IRQ=4]
Use the Change Settings option to change the serial port IO port address and interrupt
address.

IO=3F8h; IRQ=4 D
EFAULT
Serial Port I/O port address is 3F8h and the
interrupt address is IRQ4

IO=3F8h;
IRQ=3, 4
Serial Port I/O port address is 3F8h and the
interrupt address is IRQ3, 4

IO=2F8h;
IRQ=3, 4
Serial Port I/O port address is 2F8h and the
interrupt address is IRQ3, 4

IO=3E8h;
IRQ=3, 4
Serial Port I/O port address is 3E8h and the
interrupt address is IRQ3, 4

IO=2E8h;
IRQ=3, 4
Serial Port I/O port address is 2E8h and the
interrupt address is IRQ3, 4

Transfer Mode [RS232]
Use the Transfer Mode option to select the Serial Port 1 signaling mode.

RS422 Serial Port 6 signaling mode is RS-422

RS232 D
EFAULT
Serial Port 6 signaling mode is RS-232

RS485 Serial Port 6 signaling mode is RS-485