IEI Technology VWBOX-122A Скачать руководство пользователя страница 22

Страница: 22 / 82

VWBOX-122A/133A Video Wall Controller

Page 12

3.1

Requirements

NOTE:

The VWBOX-122A/133A requires all attached components to comply

with the specifications. If the specifications are not met, the

VWBOX-122A/133A may not work as desired.

Before installation, make sure the minimum hardware requirements are met.

3.1.1

Video Card

The video card output resolution must meet the input requirements for the chosen output

mode. The following graphics chips support all the required output resolution:

Nvidia GeForce 8000 & 9000 series or higher

ATI Radeon™ HD 3800 & 4600 series or higher

Other graphics cards might work, but must meet the requirements listed in Section 3.6.

3.1.2

Monitors

The monitors attached to the video box must support the specified output resolution. The

exact requirement depend on the installation refer to Section 3.6 for the requirements.

For best results, the monitors should all be identical.

3.1.3

Cables

One dual-link DVI cable is included with the VWBOX-122A/133A. The following cables are

required for installation:

Video card to video box: one dual-link DVI cable (included)

Video box to monitors: each monitor requires a single-link or dual-link DVI

cable (exact number depends on setup, one per attached monitor)

Содержание VWBOX-122A



















































































Результаты поиска

Содержание VWBOX-122A

Отзывы:

Бренды по названию

Популярные бренды

IEI Technology VWBOX-122A, Руководство пользователя

Результаты поиска

Содержание VWBOX-122A

Отзывы:

Бренды по названию

Популярные бренды