manualshive.com logo in svg

IEI Technology VTT-1000, Руководство пользователя, Страница: 52 / 61

Поделиться
Скачать
IEI Technology VTT-1000 Скачать руководство пользователя страница 52

 

 

VTT-1000 Vehicle Tracking Terminal

Page 44 

 

FCC WARNING 

This equipment complies with Part 15 of the FCC Rules. Operation is subject to the 

following two conditions: 

 

This device may not cause harmful interference, and 

 

This device must accept any interference received, including interference that 

may cause undesired operation. 

 

This equipment has been tested and found to comply with the limits for a Class A digital 

device, pursuant to part 15 of the FCC Rules. These limits are designed to provide 

reasonable protection against harmful interference when the equipment is operated in 

a commercial environment. This equipment generates, uses, and can radiate radio 

frequency energy and, if not installed and used in accordance with the instruction 

manual, may cause harmful interference to radio communications. Operation of this 

equipment in a residential area is likely to cause harmful interference in which case the 

user will be required to correct the interference at his own expense. 

 

 

Содержание VTT-1000






























































Отзывы:

Нет отзывов