IEI Technology tKINO-BW Series Скачать руководство пользователя страница 85

Страница: 85 / 143

tKINO-BW SBC

Page 71

NOTE:

To install software from the downloaded ISO image file in Windows 8,

8.1 or 10, double-click the ISO file to mount it as a virtual drive to view

its content. On Windows 7 system, an additional tool (such as Virtual

CD-ROM Control Panel from Microsoft) is needed to mount the file.

NOTE:

The Intel TXE

requires that Microsoft's “Kernel-Mode Driver

Framework (KMDF) version 1.11 update for Windows 7” must be

installed first on Windows 7 OS. If the KMDF is not installed, either

error 37 or error 28 may appear on the Intel TXE device in Device

Manager.

Please find the KMDF version 1.11 update for Windows 7 in the TXE

driver folder or click the following link to download it.

http://www.microsoft.com/en-us/download/details.aspx?id=38423

Содержание tKINO-BW Series
















































































































































Результаты поиска

Содержание tKINO-BW Series

Отзывы:

IEI Technology tKINO-BW Series, Руководство пользователя, Страница: 85 / 143

Результаты поиска

Содержание tKINO-BW Series

Отзывы: