IEI Technology TDM-121GMS, Руководство пользователя

Страница: 41 / 79

TDM Series Monitor
Page 27
4.2 Unpacking
4.2.1 Packaging
When shipped, the TDM series industrial monitor is wrapped in a plastic bag. Two
polystyrene ends are placed on either side of the monitor. The monitor is then placed into
a first (internal) cardboard box. This box is then sealed and placed into a second (external)
cardboard box. The second box is also sealed. A bag containing accessory items is
placed underneath the monitor, at the bottom of the internal (first) box.
4.2.2 Unpacking Procedure
To unpack the TDM series industrial monitor, follow the steps below:
WARNING:
The front side LCD screen has a protective plastic cover stuck to the
screen. Only remove the plastic cover after the TDM series industrial
monitor has been properly installed. This ensures the screen is
protected during the installation process.
Step 1:
Use box cutters, a knife or a sharp pair of scissors to open the seal on the top
side of the external (second) box.
Step 2:
Open the external (second) box.
Step 3:
Use box cutters, a knife or a sharp pair of scissors the seal on the top side of the
internal (first) box.
Step 4:
Lift the monitor out of the boxes.
Step 5:
Remove both polystyrene ends, one from each side.
Step 6:
Pull the plastic cover off the TDM series industrial monitor.
Step 7:
Make sure all the components listed in the packing list are present.
Step 0: