IEI Technology TANK-XM810 Series, Руководство пользователя

Страница: 49 / 132

TANK-XM810
Page 37
3.9.1 Flash Descriptor Security Override Jumper
The Descriptor Security Override jumper (J_FLASH1) allows users to enable or disable
the ME firmware update. Refer to Figure 3-30 and Table 3-5 for the jumper location and
settings.
Setting Description
Short 1-2 Disabled (default)
Short 2-3 Enabled
Table 3-5: Flash Descriptor Security Override Jumper Settings
Figure 3-30 Flash Descriptor Security Override Jumper Location
To update the ME firmware, please follow the steps below.
Step 1:
Before turning on the system power, short the Flash Descriptor Security
Override jumper.
Step 2:
Update the BIOS and ME firmware, and then turn off the system power.
Step 3:
Remove the metal clip on the Flash Descriptor Security Override jumper or
return to its default setting (open).
Step 4:
Restart the system. The system will reboot to complete the ME firmware update.