IEI Technology TANK-XM810 Series, Руководство пользователя

Страница: 62 / 132

Page 50
TANK-XM810
4.4.1 AT/ATX Power Mode Setting (J_ATX_AT1)
Use the J_ATX_AT1 switch to specify the systems power mode as AT or ATX
PIN NO. DESCRIPTION
1-2 (Right) ATX Power Mode (default)
2-3 (Left) AT Power Mode
Table 4-25:AT/ATX Power Mode Switch Pinouts
1
3
Figure 4-8: AT/ATX Power Mode Switch
4.4.2 Clear CMOS Setup (J_CMOS1)
To clear the CMOS Setup (for example if you have forgotten the password, you should
clear the CMOS and then reset the password), you should take off the battery(BT1) and
press the button for about 3 seconds. This will set back to normal operation mode.
PIN NO. DESCRIPTION
NC Keep CMOS Setup (Normal Operation)
Press button Clear CMOS Setup
Table 4-26: Clear CMOS Button Pinouts
Figure 4-9: Clear CMOS Button