IEI Technology TANK-760, Руководство пользователя

Страница: 27 / 89

TANK-760 Em b e d d e d S ys te m
P a g e 18
3.3 S O-DIMM In s ta lla tio n
WARNING:
Using incorrectly specified SO-DIMM may cause permanently damage
the TANK-760. Please make sure the purchased SO-DIMM complies
with the memory specifications of the TANK-760.
To install a SO-DIMM into a SO-DIMM socket, please follow the steps below.
S te p 1:
Remove the bottom panel by removing the five retention screws from the bottom
panel ( Figure 3-1 ).
S te p 2:
Unplug the SATA signal and power cables connected to the TANK-760, and then
place the bottom panel on a flat surface.
S te p 3: Locate the SO-DIMM socket on the motherboard ( Figure 3-5 ).
Figure 3-5: SO-DIMM Socket