IEI Technology TANK-720, Руководство пользователя

Страница: 36 / 118

TANK -720 E mbedded S ys tem
P age 23
S tep 5:
Push the SO-DIMM into the socket at an angle ( Figure 3-10 ).
Figure 3-10: SO-DIMM Installation
S tep 6:
Gently pull the arms of the SO-DIMM socket out and push the rear of the
SO-DIMM down ( Figure 3-10 ).
S tep 7:
Release the arms on the SO-DIMM socket. They clip into place and secure the
SO-DIMM in the socket.
S tep 8: Install the bracket that was previously removed in the same position it was
before.
S tep 9:
Reinstall the bottom panel to the TANK-720.
3.8 Mounting the S ys tem with Mounting B rackets
To mount the embedded system onto a wall or some other surface using the two mounting
brackets, please follow the steps below.
S tep 1:
Turn the embedded system over.
S tep 2:
Align the two retention screw holes in each bracket with the corresponding
retention screw holes on the sides of the bottom surface ( Figure 3-11 ).