IEI Technology TANK-600 Series, Руководство пользователя

Страница: 30 / 103

TANK-600 Em b e d d e d S ys te m
P a g e 18
Figure 3-6: Mounting Bracket Retention Screws
S te p 3: Secure the brackets to the system by inserting two retention screws (M3*6, P/N :
44003-030062-RS) into each bracket ( Figure 3-6 ).
S te p 4: Drill holes in the intended installation surface.
S te p 5:
Align the mounting holes in the sides of the mounting brackets with the predrilled
holes in the mounting surface.
S te p 6: Insert four retention screws, two in each bracket, to secure the system to the
wall.
3.5.2 Mo u n tin g th e S ys te m with Wa ll Mo u n t Kit (Op tio n a l)
To mount the embedded system onto a wall using the VESA MIS-D 100 wall mount kit,
please follow the steps below.
S te p 1: Select the location on the wall for the wall-mounting bracket.
S te p 2:
Carefully mark the locations of the four bracket screw holes on the wall.
S te p 3:
Drill four pilot holes at the marked locations on the wall for the bracket retention
screws.
S te p 4:
Align the wall-mounting bracket screw holes with the pilot holes.