IEI Technology TANGO-7010 Series, Руководство пользователя

Страница: 53 / 125

Page 42
TANGO-7010 Embedded System
4.2.9 Clear CMOS Button (J_CMOS1)
CN Label:
J_CMOS1
CN Type:
Button
CN Location:
See Figure 4-10
CN Pinouts:
See Table 4-10
To clear the CMOS Setup (for example if you have forgotten the password, you should
clear the CMOS and then reset the password), you should
disconnect the RTC battery
and
press the button for about 3 seconds. This will set back to normal operation mode.
Figure 4-10: Clear CMOS Button Location
PIN NO. DESCRIPTION
NC Keep CMOS Setup (Normal Operation)
Press button Clear CMOS Setup
Table 4-10: Clear CMOS Button Pinouts