IEI Technology ROCKY-4783EV Series, Руководство пользователя

Страница: 10 / 46

10
2.3 Clear CMOS Settings
If want to clear the CMOS settings, close the JP10 (1-2) about 3
seconds, then open it again. This will set CMOS to normal operation
mode, i.e. JP10 (2-3).
• JP10: Clear CMOS Settings (Reserved Function)
JP10 Description
1-2 Clear CMOS Settings
2-3 Normal Operation
WARNING:
When you change the power from ATX to AT, or change the CPU
type, be sure to clear CMOS (power on) first. Otherwise, the CPU
Board may fail to boot up.
2.4 Onboard Keyboard/Mouse source Setting
JP11 Description
1-2 Vcc (+5V)
2-3 5VSB
2.5 CompactFlash Master/Slave Setting
JP2 Description
CLOSE Master
OPEN Slave