IEI Technology PUZZLE-IN003B, Руководство пользователя

Страница: 38 / 86

PUZZLE-IN003B
Page 28
3.10.1 Jumper Settings
To configure the jumper settings, please follow the steps below.
Step 1: Remove the top cover. See Section 3.2 .
Step 2: Locate the jumper/switch on the embedded motherboard.
Step 3: Make the jumper settings in accordance with the settings described and defined
in the following sections. Step 0:
3.10.1.1 Clear CMOS
If the PUZZLE-IN003B fails to boot due to improper BIOS settings, the clear CMOS
jumper clears the CMOS data and resets the system BIOS information. To do this, short
the jumper for 3 seconds or more, then remove the jumper clip.
Setting Description
Open Keep current BIOS setup
Short Clear BIOS
Table 3-5: Clear BIOS Jumper Settings
The clear CMOS jumper location is shown in Figure 3-13 below.
Figure 3-13: Clear CMOS Jumper Location