IEI Technology PUZZLE-IN003A, Руководство пользователя

Страница: 33 / 89

PUZZLE-IN003A
Page 23
3.6.2 Console Connection
The PUZZLE-IN003A has one RJ-45 serial device connector on the front panel. The
RJ-45 connector for the serial port can be identified easily as the RJ-45 for the network
has two LEDs on the port, while the connectors for the serial cables don’t. The pinouts of
the serial port are listed below.
Pin Description Pin Description
1 NRTS1 5 GND
2 NDTR1 6 NSIN1
3 NSOUT1 7 NDSR1
4 GND 8 NCTS1
Table 3-3: RJ-45 Serial Port Pinouts
The serial device slot (RJ-45) connects to a cable with a standard D-sub 9 connector or a
USB connector (varied from SKU) at the other end.
3.6.2.1 Enable Console Port When Booting
To configure the PUZZLE-IN003A to make it auto enable the console port when booting,
follow the steps below.
NOTE:
This method only works in Linux Ubuntu, the default operating system.
Step 1: Use the console cable shipped with the product to connect the RJ-45 console
port of the PUZZLE-IN003A with your PC.
Step 2: In your PC, go to Windows Device Manager and check for the serial line of the
connected USB serial port. In this case, it is COM3.