IEI Technology PUZZLE-IN002, Руководство пользователя

Страница: 32 / 96

PUZZLE-IN002
Page 22
Figure 3-11: Mini-SATA Slot Location
Step 3: Remove the pre-installed retention screw from the standoff.
Step 4: Line up the notch on the card with the notch on the slot. Slide the card into the
socket at an angle of about 20º.
Step 5: Secure the full-size card with the retention screw previously removed.
3.7.1 Half-size Card Installation
The Mini-SATA slot also allows installation of a half-size Mini-SATA card. To install a
half-size card, please follow the steps below.
Step 1: Remove the pre-installed retention screw and the standoff from the
motherboard.
Step 2: Install the previously removed standoff to the screw hole for the half-size
Mini-SATA card.
Step 3: Line up the notch on the card with the notch on the slot. Slide the card into the
socket at an angle of about 20º.
Step 4: Secure the half-size card with the retention screw previously removed.