IEI Technology PUZZLE-IN001, Руководство пользователя, Страница: 75 / 114

PUZZLE-IN001
Page 75
4.4.2 PCH-IO Configuration
Use the PCH-IO Configuration menu ( BIOS Menu 17 ) to configure the PCH parameters.
Aptio Setup Utility – Copyright (C) 2018 American Megatrends, Inc.
Chipset
PCH-IO Configuration
Auto Power Button Status
[Disable (ATX)]
Restore AC Power Loss [Last State]
> PCI Express Configuration
> SATA And RST Configuration
> NETWORK Configuration (ByPass Setting)
M.2 B Key (M2_1) device selection [SATA]
Module B Configuration [PCIEx4 x 2]
Select AC power state
when power is re-applied
after a power failure.
---------------------

: Select Screen
↑ ↓
: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit
Version 2.20.1271. Copyright (C) 2018 American Megatrends, Inc.
BIOS Menu 17: PCH-IO Configuration

Restore AC Power Loss [Last State]
Use the Restore AC Power Loss BIOS option to specify what state the system returns to
if there is a sudden loss of power to the system.

Power Off The system remains turned off

Power On The system turns on

Last State D
EFAULT
The system returns to its previous state. If it was on, it
turns itself on. If it was off, it remains off.

M.2 B Key (M2_1) device selection [SATA]
Use the M.2 B Key (M2_1) device selection [SATA] BIOS option to configure M.2 device
as SATA or PCIe device.

SATA D
EFAULT
Configure M.2 device as SATA device.

PCIE
Configure M.2 device as PCIe device.