IEI Technology PUZZLE-A001, Руководство пользователя

Страница: 33 / 90

PUZZLE-A001
Page 23
Step 3:
Remove the on-board retention screw.
NOTE:
For 2280-size module installation,
the screw and the standoff for the 2260 module must also be removed to avoid
interference.
Step 4: Line up the notch on the module with the notch on the slot. Slide the M.2 module
into the socket at an angle of about 20º.
Step 5:
Push the M.2 module down and secure it with the previously removed retention
screw.
3.8 PCIe Mini Card Installation
The PUZZLE-A001 has one full-size/half-size PCIe Mini slot on the motherboard. To
install a full-size module, follow the instructions below.
Step 1: Remove the top cover from the PUZZLE-A001. See Section 3.2 .
Step 2: Remove the internal cover by removing the four retention screws.