IEI Technology PUZZLE-5030, Руководство пользователя, Страница: 55 / 119

PUZZLE-5030
Page 55
3.16.2.2 Clear CMOS
If the PUZZLE-5030 fails to boot due to improper BIOS settings, the clear CMOS button
clears the CMOS data and resets the system BIOS information. To do this, push the clear
CMOS button for a few seconds.
If the “CMOS Settings Wrong” message is displayed during the boot up process, the fault
may be corrected by pressing the F1 to enter the CMOS Setup menu. Do one of the
following:
 Enter the correct CMOS setting
 Load Optimal Defaults
 Load Failsafe Defaults.
After having done one of the above, save the changes and exit the CMOS Setup menu.
The clear CMOS button location is shown in
552H
Figure 3-24 below.
Figure 3-24: Clear CMOS Button Location