IEI Technology PPC-F 15B-BTi-J1/2G/PC-R10 Скачать руководство пользователя страница 130

Страница: 130 / 140

PPC-F12B/15B/17B-BTi Panel PC

Page 116

WARNING:

The precautions outlined in this chapter should be strictly followed.

Failure to follow these precautions may result in permanent damage to

the EP series.

C.1 Safety Precautions

Please follow the safety precautions outlined in the sections that follow:

C.1.1 General Safety Precautions

Please ensure the following safety precautions are adhered to at all times.



Follow the electrostatic precautions

outlined below whenever the EP

series is opened.



Make sure the power is turned off and the power cord is disconnected

whenever the EP series is being installed, moved or modified.



Do not apply voltage levels that exceed the specified voltage range

Doing so may cause fire and/or an electrical shock.



Electric shocks can occur

if the EP series chassis is opened when the EP

series is running.



Do not drop or insert any objects

into the ventilation openings of the EP

series.



If considerable amounts of dust, water, or fluids enter the EP series

, turn

off the power supply immediately, unplug the power cord, and contact the EP

series vendor.



DO NOT

Drop the EP series against a hard surface.

Strike or exert excessive force onto the LCD panel.

Touch any of the LCD panels with a sharp object

In a site where the ambient temperature exceeds the rated temperature

Содержание PPC-F 15B-BTi-J1/2G/PC-R10













































































































































Результаты поиска

Содержание PPC-F 15B-BTi-J1/2G/PC-R10

Отзывы:

Бренды по названию

Популярные бренды

IEI Technology PPC-F 15B-BTi-J1/2G/PC-R10, Руководство пользователя

Результаты поиска

Содержание PPC-F 15B-BTi-J1/2G/PC-R10

Отзывы:

Бренды по названию

Популярные бренды