IEI Technology PPC-51xxA-H61, Руководство пользователя

Страница: 80 / 193

PPC-51xxA-H61 Panel PC
Page 65
Step 3:
Release the SO-DIMM module by pulling both the spring retainer clips outward
from the socket.
Step 4:
Grasp the SO-DIMM module by the edges and carefully pull it out of the socket.
Step 5:
Install the new SO-DIMM module by pushing it into the socket at an angle
(
Figure 4-2
).
Step 6:
Gently push the rear of the SO-DIMM module down (
Figure 4-2
). The spring
retainer clips clip into place and secure the SO-DIMM module in the socket.
Figure 4-2: SO-DIMM Module Installation
Step 7:
Push the new DIMM module until it engages and the white plastic end clips click
into place. Make sure the end clips are fully secured after installation.
Step 0:
4.5 Elevated Platform Removal
The elevated platform supports the optical drive and the hard drive. It is not necessary to
remove the hard drive bracket to remove the elevated platform.
Step 1:
Unfasten the elevated platform screws on the top panel (
7
Figure 4-3
).
Figure 4-3: PPC-5150A-H61 Top Panel Elevated Platform Screws