IEI Technology POCm-DOCKING-6BAY, Руководство пользователя

Страница: 19 / 32

POCm-DOCKING-6BAY
Page 11
3.2 Installation Precautions
When installing the docking station, please follow the precautions listed below:

Manufacturer authorization : Do not modify this equipment without
authorization of manufacturer.

Certified Engineers : Only certified engineers should install and modify the
hardware settings.

Power turned off : When installing the POCm-DOCKING-6BAY, make sure
the power is off. Failing to turn off the power may cause severe injury to the
body and/or damage to the system.
3.3 Charging Battery
To charging the batteries of the POCm-W22C/W24C-ULT3 series system, follow the steps
below:
WARNING:

The POCm-DOCKING-6BAY docking station is designed to charge the
batteries of the POCm-W22C/W24C-ULT3 system. Do not insert other type
of battery into the slots of the POCm-DOCKING-6BAY. Doing so may cause
damage to the battery and the docking station.

Use only the power adapter approved for this device. Use of another type of
adapter may risk fire or explosion;

Do not apply voltage levels that exceed the specified voltage range. Doing
so may cause fire and/or an electrical shock. Use a power cord that
matches the voltage of the power outlet, which has been approved and
complies with the safety standard of your particular country.
Step 1: Connect the supplied power adapter to the power connector on the rear of the
docking station.
Step 2: Connect the supplied power cord to the power adapter. Plug the power cord into
any standard power outlet.