IEI Technology PICOe-9452, Руководство пользователя

Страница: 59 / 250

PICOe-9452 Half-size CPU Card
Page 41
3.1 Anti-static Precautions
WARNING:
Failure to take ESD precautions during the installation of the
PICOe-9452 may result in permanent damage to the PICOe-9452 and
severe injury to the user.
Electrostatic discharge (ESD) can cause serious damage to electronic components,
including the PICOe-9452. Dry climates are especially susceptible to ESD. It is therefore
critical that whenever the PICOe-9452, or any other electrical component is handled, the
following anti-static precautions are strictly adhered to.
 Wear an anti-static wristband : - Wearing a simple anti-static wristband can
help to prevent ESD from damaging the board.
 Self-grounding :- Before handling the board touch any grounded conducting
material. During the time the board is handled, frequently touch any
conducting materials that are connected to the ground.
 Use an anti-static pad : When configuring the PICOe-9452, place it on an
antic-static pad. This reduces the possibility of ESD damaging the
PICOe-9452.
 Only handle the edges of the PCB :- When handling the PCB, hold the PCB
by the edges.
3.2 Unpacking
3.2.1 Unpacking Precautions
When the PICOe-9452 is unpacked, please do the following:
 Follow the anti-static precautions outlined in Section 3.1 .
 Make sure the packing box is facing upwards so the PICOe-9452 does not fall
out of the box.
 Make sure all the components shown in Section 3.3 are present.