IEI Technology PICOe-6612 Series Скачать руководство пользователя

Страница: 198 / 206

Page 198

IEI® Technology, Corp

PICOe-6612

Step 4:

Step 1:

Step 2:

Step 3:

Step 4:

Step 5:

Step 6:

Step 7:

Step 1:

These directories contain drivers compatible with different OSes. Select the

directory for the OS used on the system and copy all the files onto a separate

floppy disk drive.

Step 0:

E.2.3 Install SATA Drives

To implement the on-chip RAID function, two SATA drives must be connected to the

system. Use the SATA drive cables that came with the system to connect the SATA

drives.

E.2.4 Configure the SATA Controller in BIOS

To configure the RAID BIOS, follow the steps below:

Turn on the motherboard and enter the BIOS setup utility. Do this by pressing

ELETE

when the system boots up.

Select the

Advanced

Settings

menus.

Select the

IDE Configuration

sub-menu.

In the

IDE Configuration

sub-menu select the “

Onboard PCI S-ATA

Controller

” option.

Set the “

Onboard PCI S-ATA Controller

” option to the “

Raid Mode

” and press

NTER

Save the changes and exit the BIOS setup utility. To do this, hit the escape key

and select the

Exit

menu from the top menu bar in the BIOS utility setup.

When the

Exit

menu appears, select the “

Save Changes and Exit

” menu option.

Step 0:

E.2.5 Configure the RAID BIOS

The next step is to configure the BIOS RAID. To do this, follow the steps below.

Restart the system. Wait for the POST to be completed.

Содержание PICOe-6612 Series















































































































































































































Результаты поиска

Содержание PICOe-6612 Series

Отзывы:

Похожие инструкции для PICOe-6612 Series

Бренды по названию

Популярные бренды

IEI Technology PICOe-6612 Series, Руководство пользователя

Результаты поиска

Содержание PICOe-6612 Series

Отзывы:

Похожие инструкции для PICOe-6612 Series

Бренды по названию

Популярные бренды