IEI Technology PCIE-9650, Руководство пользователя

Страница: 93 / 230

PCIE-9650 PICMG 1.3 CPU Card
Page 75
socket. As the DIMM is inserted, the white handles on the side of the socket will
close automatically and secure the DIMM to the socket. See Figure 5-8 .
Step 4: Removing a DIMM . To remove a DIMM, push both handles outward. The
memory module is ejected by a mechanism in the socket. Step 0:
5.5 Jumper Settings
NOTE:
A jumper is a metal bridge that is used to
close an electrical circuit. It consists of
two metal pins and a small metal clip
(often protected by a plastic cover) that
slides over the pins to connect them.
To CLOSE/SHORT a jumper means
connecting the pins of the jumper with
the plastic clip and to OPEN a jumper
means removing the plastic clip from a
jumper.
Before the PCIE-9650 is installed in the system, the jumpers must be set in accordance
with the desired configuration. The jumpers on the PCIE-9650 are listed in Table 5-1 .
Description Label Type
Clear CMOS J_CMOS1 3-pin header
Table 5-1: Jumpers
Jumper