IEI Technology PCIE-9152 Скачать руководство пользователя страница 84

Страница: 84 / 194

PCIE-9152 PCIMG 1.3 CPU Card

Page 68

The PCIE-9152 must be installed in a chassis with ventilation holes on the sides allowing

airflow to travel through the heat sink surface. In a system with an individual power supply

unit, the cooling fan of a power supply can also help generate airflow through the board

surface.

NOTE:

IEI has a wide range of backplanes available. Please contact your

PCIE-9152 vendor, reseller or an IEI sales representative at

[email protected]

or visit the IEI website (

http://www.ieiworld.com.tw

)

to find out more about the available chassis.

5.5.2 Backplane Installation

Before the PCIE-9152 can be installed into the chassis, a backplane must first be

installed. Please refer to the installation instructions that came with the backplane and the

chassis to see how to install the backplane into the chassis.

NOTE:

IEI has a wide range of backplanes available. Please contact your

PCIE-9152 vendor, reseller or an IEI sales representative at

[email protected]

or visit the IEI website (

http://www.ieiworld.com.tw

)

to find out more about the available chassis.

5.5.3 CPU Card Installation

To install the PCIE-9152 CPU card onto the backplane, carefully align the CPU card

interface connectors with the corresponding socket on the backplane. To do this, please

refer to the reference material that came with the backplane. Next, secure the CPU card to

the chassis. To do this, please refer to the reference material that came with the chassis.

Содержание PCIE-9152



































































































































































































Результаты поиска

Содержание PCIE-9152

Отзывы:

Бренды по названию

Популярные бренды

IEI Technology PCIE-9152, Руководство пользователя

Результаты поиска

Содержание PCIE-9152

Отзывы:

Бренды по названию

Популярные бренды