IEI Technology PCIE-690AM2, Руководство пользователя

Страница: 101 / 234

PCIE-690AM2 PICMG 1.3 CPU Card
Page 79
5.5 Jumper Settings
NOTE:
A jumper is a metal bridge that is used to
close an electrical circuit. It consists of
two metal pins and a small metal clip
(often protected by a plastic cover) that
slides over the pins to connect them.
To CLOSE/SHORT a jumper means
connecting the pins of the jumper with
the plastic clip and to OPEN a jumper
means removing the plastic clip from a
jumper.
Before the PCIE-690AM2 is installed in the system, the jumpers must be set in
accordance with the desired configuration. The jumpers on the PCIE-690AM2 are listed in
Table 5-1 .
Description Label Type
Clear CMOS JP2 3-pin header
Table 5-1: Jumpers
5.5.1 Clear CMOS Jumper
Jumper Label: JP2
Jumper Type: 3-pin header
Jumper Settings:
See Table 5-2
Jumper Location: See Figure 5-5
Jumper