INSTALLING THE OTIU
Place the OTIU in an out-of-the-way location near the primary telephone connection and an electrical outlet. Do not
place the OTIU near a computer or any other “Radio Noise Source”. Make sure to keep obstructions away from the
antenna and do not allow any cables or cords to become entangled in it.
Plug in the 22V power adapter into the back of the OTIU where it is labeled "22VDC". The POWER light on the
OTIU will light-up.
Plug the included phone cord into the wall phone jack and connect to the OTIU using the LINE port on the back of
the unit.
Connect the telephone line to the OTIU using the PHONE port on the back of the unit.
1)
What will are you connecting the OTIU to?
•
Oracle Front Door go to step 1
•
GAP unit go to step 2
•
Mini GAP go to step 4
•
Repeaters go to step 5
ACTIVATING THE OTIU WITHIN AN EXISTING NETWORK
When activating the OTIU within an existing network, simply follow the instructions for “Activating the
OTIU with GAP” if the GAP is the Active (Main) Unit, the instructions for “Activating the OTIU with
MiniGAP” if the MiniGAP is the Active Unit, or “Activating the OTIU with a FrontDoor” if the FrontDoor is
the Active Unit. A few examples of an existing network are pictured as follows:
OTIU
Intercom
Active
Mode
Front Door
MiniGAP
NOTE: By activating the OTIU to the Active Unit, you are activating the OTIU into the existing network
with no further steps to take.
Содержание oracle
Страница 9: ......
